Click image to view full size image
Hydraulic Cutter Perforated Shutter Door Roll Forming Machine Introduction
Shutter door roll forming machine is the major equipment for producing rolling doors, It uses galvanized steel or different colors of color steel or aluminum as raw material, production of color plate rolling gates with the advantages of brilliant color, do not fade, do not rust, fire cut off, easy deformation and high strength.
Main component of the line:
No. |
Name |
Quantity |
Main roll former | ||
1 |
Un-coiler (2 tons ) MANUAL |
1 |
2 |
roll former |
1 |
3 |
Hydraulic cutter |
1 |
4 |
PLC control |
1 |
5 |
Output table with rollers(6 meters) |
1 |
TECHNICAL DETAILS
Un-coiler
1. Capacity: 2 tons
2. Material: #45 steel quenched
3. Inner diameter: 410~ 580mm
Main roll former
1. Stations: 13
2. Rollers material: CR 15; HRC 60. Chrome coated: 0.03~0.05mm. The Strength in Mpa: 70 TON, 800 MPA
3. Shaft material: Diameter: 50mm, material is #45 steel. Quenched: hot treatment. The strength of the Main Shaft in Mpa:70 tons, 650MPA
4. Bearing brand: FAG Germany
5. Main Motor: 5.5 KW, 380V, 50HZ
CHAMICAL COMPOSITION:
C |
SI |
MN |
P |
S |
CR |
NI |
CU |
MO |
AI |
V |
B |
|
Shaft |
0.450 |
0.220 |
0.540 |
0.027 |
0.008 |
0.050 |
0.020 |
0.010 |
0.000 |
0.009 |
0.000 |
0 |
Rollers |
1.00 |
0.32 |
0.33 |
0.011 |
0.003 |
1.49 |
0.05 |
0.00 |
0.02 |
0.041 |
||
Cutter |
1.57 |
0.34 |
0.38 |
0.022 |
0.010 |
11.10 |
0.18 |
0.14 |
0.48 |
|||
Cut knife |
2.04 |
0.23 |
0.23 |
0.020 |
0.010 |
11.66 |
0.12 |
0.06 |
PLC Control Cabinet:
1. Touch screen brand: DELTA
2. PLC brand: DELTA
3. Inverter brand: DELTA
4. Main components for low pressure electricity: Schneider Germany
5. Encoder: Omron
Output table
1. Length: 6 meters
2. Drive type: Rollers
CUTTING PLATFORM
1. Cutting type: Hydraulic system
2. Motor: 4KW; 380V; 50HZ
3. Material of cut die: CR12MOV; Quenched; the Strength in MPA: 950
Metal rolling shutters forming machine
Un-coiler --Pneumatic feeder -- Micro perforation -- Re-coiler
1 |
Un-coiler (automatic) 2 tons |
1 |
2 |
Mechanical press machine |
1 |
3 |
Pneumatic feeder |
1 |
4 |
Re-coiler (automatic) |
1 |
5 |
Perforated mould |
1 |
http://www.longborollformer.com/